Understanding Status Codes for NoWire

Overview

In wireless transmitter systems, various status codes are used to indicate specific conditions or alerts. Understanding these codes is crucial for effective monitoring, maintenance, and troubleshooting of the system. This article provides detailed explanations of each status code you may encounter.

Status Codes and Their Meanings

T = Tamper

Description: This code indicates that the transmitter case has been opened.
Implications: Tampering with the transmitter can affect its operation. It's essential to check if the transmitter has been intentionally accessed for maintenance or if unauthorized access occurred.
Action: Inspect the transmitter for any physical damage or signs of tampering. Ensure the case is securely closed and recheck the system for proper functioning.

B = Low Battery

Description: The transmitter's battery level is low.
Implications: A low battery can compromise the transmitter's ability to function correctly, leading to possible data loss or communication failure.
Action: Replace the battery as soon as possible to maintain uninterrupted operation of the transmitter.

L = Leak Alarm

Description: A leak alarm is triggered if there is a continuous change in the input value every consecutive 2.5-hour period over 48 hours.
Implications: This may indicate a leak or continuous flow issue.
Action: Investigate the source of the input change to determine if there is a leak or another issue causing the continuous value change.

R = Transmitter Reset

Description: Indicates that the transmitter has been reset.
Action: Ensure the reset was intentional. If not, investigate potential causes such as power issues. The display will clear on its own after the reset process is complete.

F = Fast Transmission Mode

Description: The transmitter is in a mode where it transmits data once every minute instead of the standard hourly transmission.
Activation: This mode can be forced by pressing the tamper switch three times within 10 seconds.
Automatic Exit: The transmitter will exit this mode after 3 days or if the reset button is pressed.
Implications: Fast transmission mode is useful for troubleshooting communication issues by providing more frequent data updates.
Action: Use this mode when diagnosing wireless communication problems. Be aware that increased transmission frequency may deplete the battery faster.

Z = Transmitter Not Seen

Description: Indicates that the transmitter has not been detected for 24 hours.
Implications: The transmitter may be out of range, powered off, or malfunctioning.
Action: Check the transmitter’s location and determine if the batteries are dead. Ensure it is within the communication range of the receiver and functioning correctly.

N = Non-Advancing Alert

Description: Triggered when the transmitter does not detect any pulse signal for 14 days.
Implications: This could indicate a problem with the pulse signal source or the transmitter itself.
Action: Verify the pulse signal source and ensure the transmitter is properly connected and operational.

* = Multiple Conditions

Description: Indicates that multiple status conditions are present simultaneously.
Implications: More than one issue may be affecting the transmitter.
Action: Address each condition individually, following the guidelines for each status code to resolve all issues.

Summary

These status codes provide valuable insights into the state of your wireless transmitter system. Regular monitoring and timely action based on these codes can help maintain system reliability and prevent potential problems.

For any unresolved issues or further assistance, please create a ticket by using the associated link:
www.submetersolutions.com/ticket