All Systems Troubleshooting Inaccurate Meter Reads Bucket Test (Pulse Ring): Required Items: 5 Gallon Bucket Voltmeter with oHms setting and/or Continuity Setting Before starting, make sure all water is turned off in the unit so no other water will ...
All Systems Troubleshooting Inaccurate Meter Reads Bucket Test (Direct Read): Required Items: 5 Gallon Bucket Before starting, make sure all water is turned off in the unit so no other water will be tracked while testing. Using a 5 gallon bucket, ...
Hello, In order to change a pulse ring on the meter you will need to break the tabs on the original ring which can not be used afterwards. *The portion selected has a magnet underneath the plastic to read the pulses produced by the meter. THIS NEEDS ...
Introduction Using a multimeter to check if your water meter is providing pulses is a straightforward process. This guide will walk you through the steps to check the pulses using the continuity setting on your multimeter. Tools Required Digital ...
Overview "Over pulsing" is a technical anomaly where a submetering system records a higher volume of utility consumption (water, gas, or electric) than what has physically passed through the meter. This results in the software showing a higher ...