Configuring IMR on RR4's and RR4-TR's

Configuring IMR on RR4's and RR4-TR's

1.) First you will need to download the Next Century app called NCSS in the app store. Here's what the page looks like:
NCSS in the iPhone app store.
2.) From there, create an account or log in. You'll be taken to the below page. Tap on the three lines in the top left corner.
A drawn-in green arrow points to the three lines you'll need to tap.
3.) Make sure your Bluetooth is on and you are next to the Remote Reader. Then, tap "Direct Connect".


4.) If your Bluetooth is on and you're next to the Remote Reader, you will see the Remote Reader pop up on this screen. Tap on the box.


5.) That will take you to the below page. When you're there, scroll down until you see "Meter 1".
The initial page it takes you to. Scroll down from here.
This is where you want to be, under "Meter 1".
6.) Tap where it says "IMR" (Initial Meter Read). Then copy the reading from the physical meter itself into the app.

7.) Tap "Save" in the upper right hand corner.

Done!